Buyer's guide
Türkçe okuWhat Is a Hair Graft? Follicular Units and Instrument Sizes
How a graft's hair count, caliber and depth set the FUE punch diameter, DHI needle bore and sapphire blade width; a size table by graft type.
By Nomedika · Updated
What a graft is
Hair does not grow as single, evenly spaced strands; it grows in natural groups called follicular units. A unit usually holds 1 to 4 hairs, surrounded by a thin envelope of tissue that belongs to it. When the unit is removed whole and prepared for transplantation, it is called a graft. In planning, a graft is a counting unit; in the operating room it is a small cylinder of tissue that has to be cut free, held, kept moist and seated without being squeezed. The instruments deal with the second meaning.
Graft count is not hair count
Because many units hold 2 or 3 hairs, a case carries more hairs than grafts.
How a graft is described from the instrument side
- Hair count: single-hair, 2-hair and 3–4-hair units differ in width; a donor area yields a mix
- Caliber: hair thickness varies by patient and donor region; at the same hair count, fine and coarse hair give grafts of different width
- Depth: how deep the follicles sit, which sets how far the punch must travel to free the unit
- Hair count and caliber set the width, depth sets the length
How the graft sizes the punch
The punch inner diameter has to clear the unit: a tight diameter risks cutting follicles at the edge of the group, a generous one takes more tissue than needed. The working length has to reach follicle depth. According to Garry, transection during extraction is influenced mainly by how well the diameter matches graft caliber, how well the working length matches follicle depth, alignment with the hair's exit angle and the condition of the edge.
How the graft sizes the needle and the blade
- DHI: the graft is loaded into the implanter needle and placed through it; a small bore squeezes the graft at loading, a large one lets it sit loose
- Sapphire and standard FUE: channels are opened before placement, and blade width sets channel width
- A punch is specified by inner diameter, a needle by bore and a blade by edge width; the scales differ and the graft links them, so the three sizes are planned together
Starting sizes by graft type (Garry publication)
- Finest single-hair units: punch Ø 0.60–0.65 mm · DHI needle Ø 0.7 mm (yellow) · sapphire blade 1.1 mm
- Fine single-hair grafts: punch Ø 0.70 mm · DHI Ø 0.8 mm (blue) · blade 1.1–1.2 mm
- Mixed follicular units: punch Ø 0.75–0.80 mm · DHI Ø 0.9 mm (red) · blade 1.3–1.4 mm
- Fuller multi-hair units: punch Ø 0.85 mm · DHI Ø 1.0 mm (white) · blade 1.5 mm
- Multi-hair units and coarse calibers: punch Ø 0.90 mm · DHI Ø 1.1 mm (black) · blade 1.6–1.7 mm
Two practical points
A real case is rarely one graft type, so a plan usually names adjacent sizes of each instrument to cover the mix. And the plan runs from the donor forward: the punch diameters chosen for the donor profile set the calibers extracted, and needle bores or blade widths are chosen to seat those calibers. The table is a starting point; the final choice for any zone and patient is the surgeon's.
How many hairs does one graft carry?
A follicular unit usually holds 1 to 4 hairs, so a case carries more hairs than grafts.
Is graft size the same as punch size?
No. The punch inner diameter is chosen to clear the graft, so it follows graft caliber, but they are different measurements. The same holds for needle bore and blade width.
Do I need a different needle for every graft type?
Not one per graft, but a plan with several graft types usually uses more than one bore. In the Garry line, the pen and needle of each size share a colour code.
Sources
- Garry Medical product and guide publications — Garry Medical