Skip to content

Buyer's guide

Türkçe oku

Sapphire vs Steel Blades for Hair Transplant Channel Opening

Sapphire and steel blades compared, choosing a sapphire blade width (1.1–1.7 mm), holder fit, handling, sterilisation and reuse: what to know before buying.

By Nomedika · Updated

The difference is the material

Both sapphire and steel blades open recipient channels. Steel is a dependable, economical standard; sapphire is chosen for an edge intended to stay consistent across a long session. Many clinics run both and choose per case.

Choosing the width

Width follows graft caliber and the site plan: narrower for single-hair grafts at the hairline, wider for multi-hair units in the mid-scalp. Teams usually run 2–3 widths per case. The Garry sapphire blade comes in 1.1–1.7 mm widths (0.1 mm steps), each in 4.0 / 4.5 / 5.0 / 5.5 mm lengths.

Holder fit

Sapphire blades are used in a holder. If blade and holder come from different brands, confirm the fit before ordering; for Garry blades, holder fit is stated on the quotation.

Handling and sterilisation

  • Sapphire is hard but brittle: handle the blade by the mount only and keep the edge away from metal instruments and hard trays
  • The Garry sapphire blade is supplied non-sterile and steam sterilised at 134 °C with the edge protected
  • Manufacturer statement: the Garry sapphire blade is reusable and designed for a total of up to 30,000 channel openings; replace it earlier if the edge shows damage
Sapphire blades and holdersGarry Sapphire BladeRequest a quote

Are sapphire blades reusable?

The Garry sapphire blade is published as reusable and, per the manufacturer, designed for a total of up to 30,000 channel openings. It is sterilised before each use and replaced if the edge shows damage.

How many widths should we buy?

Teams usually run 2–3 widths per case: narrow for the hairline, wider for the mid-scalp.

How many blades are in a box?

Garry sapphire blades come 10 per box, each in protective packaging.

← All guides